Uniden EXAI2980i, Owner'S Manual

Page: 43 / 64

[ 41 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E
THE INTEGRA
TED
ANSWERING DEVICE
The message counter displays the number of messages stored in memor y. If the
display flashes, then there are new messages are waiting for you. The flashing
number represents the number of new messages, not total messages. The EXAI2980
series is designed to play your new messages f irst. Af ter you play all your new
messages, you can then play your old messages.
To stop playing your
messages, press
p pllaayy//sstto op p again at
any time.
Using Your Answering System
1)Press p pllaayy//sstto op p.
The system announces the number of new and old
messages and the LED displays the number of messages.
The time and day that each message was received is
announced af ter the message is played, and the message
counter displays the number of the current messages.
When all new messages have been played, you hear a
beep. The system returns to standby.
2) Af ter you have reviewed your new messages, you can play
your old messages by again pressing p pllaayy//sstto op p. Once you
have listened to a new message, it then becomes an old
message. The old messages will then be played in the
order in which they were received.
P Pllaayyiin ng g yyo ou urr m meessssaag geess
When the answering system is full, FL is displayed on the base, and the
system announces "No remaining time". You should delete some messages so
that the system can record new messages.
(Refer to "Deleting a message" on page 43.)