Uniden EXAI2980i, Owner'S Manual

Page: 39 / 64

[ 37 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E
THE INTEGRA
TED
ANSWERING DEVICE
6) Press sseett to select the hour.
7) Press sskkiip p//ffff or rreep peeaatt//rreew w until you hear the correct minute setting. The numbers
[
00
] through [
59
] are displayed on the base as each minute is announced.
8) Press sseett to select the minute.
9) Press sskkiip
p//ffff or rreep peeaatt//rreew w until you hear the correct AM or PM setting.
The message counter displays [
A
] or [
P
].
10) Press sseett to select the AM/PM.
The EXAI2980 series announces the time that you have set and the base LED
displays [
]. To exit the menu mode, press p
pllaayy//sstto op p if desired.
SSeettttiin ng g aa P Peerrsso on naall SSeeccu urriittyy CCo od dee ((P PIIN N))
To play your messages from a remote location, you will need to enter a two-digit
Personal Identif ication Number (PIN) code (00-99). To select a PIN, per form the
following steps:
1) Press m meen nu u three times.
The current PIN code is announced as it is displayed on the
base.
2) Press sseett to change the PIN code. The system announces
current PIN code.
3) Press sskkiip
p//ffff or rreep peeaatt//rreew w until the desired number appears.
4) Press sseett to select the PIN code. The system announces the
new PIN code.
To exit the menu mode, press p pllaayy//sstto op p if desired.
The PIN code is set to
"80" when you purchase
the EXAI2980 series.