Uniden EXAI2980 Series, Owner'S Manual

Page: 13 / 64

Mounting the Base Unit on a Wall
[ 11 ] G E T T I N G S TA R T E D
GETTING ST
ARTED
SSttaan nd daarrd d w waallll p pllaattee m mo ou un nttiin ng g
This phone can be mounted on any standard wall plate.
1) Snap the wall mount adapter into the notches on
the base.
2) Plug the the AC adapter to the D
DCC IIN N 9 9V V jack.
3) Wrap the AC adapter cord inside the molded wiring channel
as shown.
4) Plug the AC adapter into a standard 120V AC wall outlet.
5)Place the handset on the base and charge for 15-20 hours.
6) Plug the telephone line cord into the TTEELL LLIIN NEE jack. Wrap
the cord inside the molded wiring channel as shown.
7) Plug the telephone line cord into the telephone outlet.
DO NOT use an outlet
controlled by a
wall switch.
SSeettttiin ng g tth hee h haan nd dsseett rreettaaiin neerr cclliip p ffo orr w waallll m mo ou un nttiin ng g
1)On the base unit, pull the handset retainer clip out of the slot
and rotate it clockwise 180 degrees.
2)Flip the retainer clip from front to back. Slide it back into the
slot so that the lip of the retainer is up and the
▼
is down.
The retainer holds the handset in place.
If you have wall
mounted the base, you
have to remove the
beltclip to hang the
handset with the display
facing forward.