Uniden EXAI 7980 Owner'S Manual Download Page 47

Page: 47 / 56

Additional information

(continued)

Mounting the base unit on a wall

[Standard wall plate mounting]

This phone can be mounted on any standard telephone wall plate.

Snap the wall mount adapter into the
notches on the base.

Plug the telephone line cord to the

TEL LINE

jack and the AC adapter to

the

DC IN 9V

jack.

Plug the telephone line cord into the
telephone outlet.

Wrap the AC adapter cord inside the
molded wiring channel. Then wrap
the cord around the strain relief notch.

Plug the AC adapter into a standard
120VAC wall outlet.

Note

Use only the Uniden AC
adapter supplied with this
phone.

Raise the antenna to a vertical
position.

Align the mounting slots on the base.
with the mounting posts on the wall.
Push in and down until the phone is
firmly seated.

AC adapter

Wall plate

AC outlet

2, 3, 4,
5, 6, 7

EXAI 7980 6th HEN 99.8.24 4:54 PM Page 47

Summary of Contents for EXAI 7980

























































Search results

Summary of Contents for EXAI 7980

Reviews:

Related manuals for EXAI 7980

Brands by name

Popular brands

Uniden EXAI 7980, Owner'S Manual

Search results

Summary of Contents for EXAI 7980

Reviews:

Related manuals for EXAI 7980

Brands by name

Popular brands