[ 4 ]
Q U I C K R E F E R E N C E G U I D E
QUICK REFERENCE GUIDE
Step 1 Charging the Battery
TO INSTALL THE HANDSET BATTERY
Step 2 Connecting
Step 3 Setting Up the Caller ID/Language
Step 4 Setting Up the Answering System
CONNECT TO A PHONE LINE
When the handset battery pack is fully charged,
after 15-20 hours of charging, plug the
telephone cord into the base unit and then into
a telephone wall jack.
Your phone is set for tone dialing. If your local
network requires pulse dialing, please see
“Choose the dial mode” on page 17.
1
Remove the cover.
TO CHANGE CALLER ID OPTIONS
1
Press and hold
cid/menu
.
2
Press or to
move
the
pointer
to
an option.
3
Press
select
to change the option
setting.
TURN THE ANSWERING SYSTEM ON
TO RECORD A PERSONAL GREETING
1
Press and hold
greeting
until
you hear “Record
greeting” and a
confirmation
tone.
2
Record your personal greeting. (Position
yourself as near to the base as possible
and speak clearly.)
3
When finished press
greeting
again or
play/stop
.
4
Press
end
and return the handset to
the base.
TO CHOOSE THE LANGUAGE
1
Press and hold
cid/menu
.
2
Press or to
move
the
pointer
to
Language
.
3
Press
select
to select
Eng
(English) or
Fr.
(French).
4
Press
end
or return the handset to
the base.
1
Plug AC adapter cord into the base unit
and then into a 120V AC outlet.
2
Place the handset on the base.
2
Connect the
battery pack
connector with
the correct
polarity.
3
Replace the cover.
TO PLUG INTO AC POWER
Note:
You must charge the battery continuously
for 15 - 20 hours before using the phone.
Note:
Three Caller ID options are available:
AutoTalk, Caller ID on Call Waiting (CIDCW),
and Area Code.
Press
answer on/off
.
A pre-recorded greeting
will play and your
system is ready to
accept calls.
status
status
EXAI378 2/8/2 6:57 PM Page 4
