[ 2 ]
www.uniden.com
QUICK REFERENCE GUIDE
CONNECT TO A PHONE LINE
When the handset battery pack is fully
charged, after 15-20 hours of charging,
plug the telephone cord into the base
unit and then into a telephone wall jack.
Your phone is set for tone dialing. If
your local network requires pulse dialing,
please see “Choosing the dial mode” on
page 15.
A
C
B
Remove the cover.
To set Caller ID, Language and Dialing
Options
To record a personal outgoing greeting
to callers, please see page 43.
Connect the
battery pack
connector with
the correct
polarity.
Replace the cover.
Note:
Use ONLY the Uniden AC adapter
supplied!
Note:
Three Caller ID options are
available: AutoTalk, Caller ID on Call
Waiting (CIDCW), and Area Code.
To turn answering
system on, press
answer on/off
.
A pre-recorded
greeting will play
and your system
is ready to
accept calls.
find hs
answer on/off
delete
charge/in use
Digital Answerer
clock/menu
mic
set
select/volume
memo rec
greeting
ringer
Step 1 Checking the Package Contents
Make sure you have received the following
items in the package. If any of these
items are missing or damaged, contact
the Uniden Parts Department.
Uniden Parts Department at
(800) 554-3988
Hours: M-F 7:00 a.m. to 5:00 p.m. CST.
We can also be reached on the web at
www.uniden.com
•Base unit
•Handset
•AC adapter
•Rechargeable
battery
•Telephone cord
•Wall mount
adapter
•Beltclip
•This Owner’s
Manual
•Other Printed
Material
Step 2 Install and Charge the Handset Battery
Step 3 Connect to Phone Line
D
Plug the AC adapter cord into
the base unit and then into a
120V AC outlet.
E
Place the handset on the base
and charge continuously for 15-20
hours before using the phone.
Step 4 Setting Display Options
Step 5 Set Answering System
A
Press/hold
call id/menu
key.
B
Press
or
keys to move the
pointer to an option.
C
Press
select
to change the
option setting.
D
Press
end
to exit.
EXAI3248.Qx 12/12/2 8:11 PM Page 2
