G E T T I N G S T A R T E D
[ 11 ]
www.uniden.com
GETTING STARTED
5) Connect the telephone line cord to the
TEL LINE
jack and a telephone outlet
once the handset is fully charged.
If your telephone outlet isn't
modular, contact your telephone
company for assistance.
Modular
Mounting the Base Unit on a Wall
Setting the handset retainer clip for wall mounting
1) On the base unit, pull the handset retainer clip out of
the slot and rotate it clockwise 180 degrees.
2) Flip the retainer clip from front to back. Slide it back
into the slot so that the lip of the retainer is up and the
▼
is down. The retainer holds the handset in place.
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Plug the AC adapter to the
DC IN 9V
jack.
2) Wrap the AC adapter cord inside the molded wiring
channel as shown.
3) Plug the AC adapter into a standard 120V AC wall outlet.
4) Plug the telephone line cord into the
TEL LINE
jack.
Wrap the cord inside the molded wiring channel
as shown.
Flipn the hook tab
over so the tab
holds the handset.
DO NOT use an AC
outlet controlled by
a wall switch.
EXAI3248.Qx 12/12/2 8:11 PM Page 11
