Uniden EXA2955 Instruction Manual Download Page 44

Page: 44 / 56

Answering Machine Features

MIC

Recording a memo message

You can leave messages for other users of the phone.

Press

“Please select mailbox” is
announced.

Press a mailbox button

, or

to which you

want to leave the message.
“Now recording” is announced
and counting starts.

Speak into the base phone
microphone (MIC) to record
your message.
A memo can be up to four
minutes in length.

Press

to stop

recording.
The message number on the
display increases by one.

PLAY/STOP

MAIL BOX 3

MAIL BOX 2

MAIL BOX 1

REC/MEMO

Notes

• If the memory becomes full, the answering machine will stop recording.
• “Memory full” is announced if no recording space is available when you

press .

• If your message is shorter than two seconds, the recording will be canceled.
• The display flashes “99” if you record a memo for more than 99 seconds.
• If a call comes in during recording, the recording will be stopped.

Tips

• If four minutes have passed in step 3, recording stops automatically, and the

recorded memo is counted as a new message.

• Even if a power interruption occurs, the memos are not erased.

REC/MEMO

EXA2955-9/21 9/21/01 4:45 PM Page 44

Summary of Contents for EXA2955

























































Search results

Summary of Contents for EXA2955

Reviews:

Related manuals for EXA2955

Brands by name

Popular brands

Uniden EXA2955, Instruction Manual

Search results

Summary of Contents for EXA2955

Reviews:

Related manuals for EXA2955

Brands by name

Popular brands