Uniden exa2850 - EXA 2850 Cordless Phone, Owner'S Manual, Page: 29 / 48

SSeelleeccttiin ng g tth hee m meessssaag gee rreecco orrd d ttiim mee
You have three record time options. The options "1 1 minute", or "4 4 minutes" set the
duration for recording the incoming messages. "A An nn no ou un nccee o on nllyy" answers the call with
the preset greeting or your personal greeting but prevents the caller from leaving a
message.
[ 27 ]
THE INTEGRA
TED
ANSWERING DEVICE
T H E I N T E G R AT E D A N S W E R I N G D E V I C E
1) Press m meen nu u six times.
You hear the current recording time ([
1
] 1 minute, [
4
] 4
minutes, [
A
] Announce only), and it is displayed on the
base.
2) Press sseett to change the recording time.
3) Press rreep
peeaatt//rreew w or sskkiip p//ffff until the desired time appears.
4) Press sseett to select the new recording time. The system
announces the new record time.
The following message is prerecorded:
"Hello, no one is available to take your call. Please call again."
▼
A An nn no ou un nccee o on nllyy ffeeaattu urree
The Announce only feature plays a prerecorded outgoing message or your own personal
outgoing message, but it will not allow the caller to leave a message. To set "Announce
only", follow the steps above.
To choose between the prerecorded message or your own personal greeting, press m
meen nu u,
then sskkiip
p//ffff or rreep peeaatt//rreew w when the outgoing message is played. Press sseett to select the
greeting of your choice. A conf irmation tone sounds. If you want to use your own
greeting, you may want to change your greeting to omit the prompt to leave a message.
Refer to "Recording a personal outgoing message" (Greeting) on page 22.
• When using the
Announce only
feature, you may
want to change your
outgoing message, if
the message prompts
the caller to leave a
message. The
prerecorded message
changes
automatically.
• To exit the menu
mode press
p pllaayy//sstto op p
if desired.