manualshive.com logo in svg

Uniden EXA 3245 Series, Owner'S Manual, Page: 9 / 56

Share
Download
Uniden EXA 3245 Series Owner'S Manual Download Page 9

G E T T I N G   S T A R T E D

[ 7 ]

www.uniden.com

GETTING STARTED

B. Install the rechargeable battery pack into the handset

The handset is powered by a rechargeable battery pack. 
The battery recharges automatically when the handset is
placed in the base unit.

Charge the handset battery pack for at least 15-20
hours before using your new cordless telephone for the
first time!

To maximize the charge capacity of your battery

pack, DO NOT plug the telephone cord into the base unit
and wall jack until the battery is fully charged.

1) Press down on the handset battery case cover (use the

finger indention for a better grip) and slide the cover
downward to remove.

2) Plug the battery pack connector (red & black wires) into

the small, black jack inside the battery compartment. 
(The connector notches fit into the grooves of the jack
only one-way.) Match the wire colors to the polarity label
in the battery compartment, connect the battery and listen
for a click to insure connection.

3) Make certain you have made a good connection by slightly

pulling on the battery wires to insure that there is a secure
connection. If the battery connector is not securely
connected, the handset will not charge properly.

Use only the Uniden
(BT-905) rechargeable
battery pack supplied
with your cordless
telephone.

EXA3245.Qx  1/27/3 10:00 AM  Page 7

Summary of Contents for EXA 3245 Series

























































Reviews:

No comments