Entering Handset Memory Numbers
For example, to store the nunmber 555-1212 in the Handset memory:
1.
Pick up the Handset and press
mem
.
The LCD displays:
2.
Enter the number
5551212
on the
Handset keypad. The LCD displays:
❉
You may enter a delay between numbers (for accessing a switchboard,
or long distance service) by pressing the
ch/pause
button on the
Handset at the point in the number sequence you wish to pause. The
ch/pause
button counts as one digit. Pressing
ch/pause
more than once
will increase the length of the pause between numbers.
3.
Press
mem
.
4.
Enter a number (
0-9
) from the
Handset keypad for the memory
location.
❉
After pressing
mem
the second time, you have 20 seconds to enter the
number you wish to store. Otherwise, an error tone will sound and the
unit returns to Standby.
5.
You will hear a confirmation beep and
the LCD displays:
Write the stored number and its memory location number on one of the
enclosed stickers.
Storing Mixed Tone/Pulse Numbers
If your Base Unit is set up for Pulse Dialing, you can store a mixed mode
number to easily access long distance services or other services requiring
Tone inputs.
Entering Base Unit Tone/Pulse Memory Numbers
For example, to enter 555-1212 as a pulse number followed by 12 as a tone
number from the base unit:
1.
Follow steps 1 and 2 in “Entering Base Unit Memory Numbers” on
page 30.
2.
Enter
5551212
on the Base Unit keypad.
3.
Press the
*
button on the Base Unit.
31