–
4
–
Step 2: Connect the Charger
1
Connect the AC adapter to the
DC IN 9V
jack and to a standard
120V AC wall outlet.
2
Set the charger on a desk or
tabletop, and place the handset
in the charger with the LCD
screen facing forward.
3
Make sure the
charge
LED
illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and that
the handset makes good contact with the charger charging contacts.
•
Use only the supplied AD-0005 AC adapter. Do not use
any other AC adapter.
• Place the charger close to the AC outlet so that you can
unplug the AC adapter easily.
4
Charge the handset for 10 hours before using.
Step 3: Register the Handset
YOU NEED TO REGISTER THE ELX500 TO THE MAIN BASE BEFORE USE!
For Main Base Models ELT560, ELBT585 and ELBT595
1
Before registering the extra handset, the battery pack MUST be
charged for 10 hours.
2
With the main base in standby mode (i.e., not being used), place
the expansion handset in the main base to begin registration.
3
While the handset is registering,
Ha nd s et Re g is t er in g
will
appear in the LCD. When
Re g is tr a ti o n co m pl e te .
is displayed,
the handset has been registered to the base.
If
R eg is t ra t io n f a il ed .
appears, please try these steps again.
UU891BH(ELX500) OM.fm Page 4 Monday, September 5, 2005 11:56 AM
