–
3
–
Installing Your Expansion Handset
Follow these three easy steps to get your new handset ready to use:
1
Install the battery pack.
2
Connect the charger and charge your new handset for 10 hours.
3
Register your new handset to the main base.
Step 1: Install the Battery Pack
1
Press down on the handset battery
case cover (use the finger indention
for a better grip) and slide the cover
downward to remove.
2
Place the battery pack in the
battery compartment with the
connectors on the battery and on
the compartment aligned.
3
Place the battery case cover back on
the handset and slide it upwards
until it clicks into place.
•
Use only the Uniden battery
(BT-0002) supplied with
your phone.
Replacement batteries are
also available through the
Uniden Parts Department.
(See page 2.)
• Recharge your handset on a
regular basis by returning
the handset to the charger
after each phone call.
Rechargeable Lithium Ion Batteries
Must Be Recycled or Disposed of Properly
UU891BH(ELX500) OM.fm Page 3 Monday, September 5, 2005 11:56 AM
