Uniden DXI 5186-2 Series Owner'S Manual Download Page 42

Page: 42 / 52

A D D I T I O N A L I N F O R M A T I O N

[ 42 ]

www.uniden.com

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.

Symptom

The

charge/in use

charge

LED won't

illuminate when the
handset is placed in
the main base or charging
cradle.

The audio sounds weak
and/or scratchy.

Can't make or receive calls.

Suggestion

•

Make sure the AC adapters are plugged into each charging cradle and
wall outlet.

•

Make sure both handsets are properly seated in each charging cradle.

•

Make sure the charging contacts on the handsets, main base and
charging cradle are clean.

•

Move the handset and/or main base to a different location away from
metal objects or appliances and try again.

•

Press

select/channel

to help eliminate background noise.

•

Make sure that the handset is not too far from the main base.

•

Re-register both handsets (see page 14).

•

Check both ends of the base telephone line cord.

•

Make sure the AC adapter is plugged into the main base and wall outlet.

•

Disconnect the AC adapter for a few minutes, then reconnect it.

•

Make sure that you are not too far from the main base.

•

Check the dialing mode.

Summary of Contents for DXI 5186-2 Series





















































Search results

Summary of Contents for DXI 5186-2 Series

Reviews:

Related manuals for DXI 5186-2 Series

Brands by name

Popular brands

Uniden DXI 5186-2 Series, Owner'S Manual

Search results

Summary of Contents for DXI 5186-2 Series

Reviews:

Related manuals for DXI 5186-2 Series

Brands by name

Popular brands