GETTING ST
ARTED
G E T T I N G S T A R T E D
[ 17 ]
www.uniden.com
1) When the phone is in standby mode, press and hold
call id/menu
. The following screen appears.
2) Press
vol/
/
to move the pointer to
Area Code
.
3) Press
select/channel
. If an area code has been already stored,
the phone displays it.
4) Use the number keys (
0
-
9
) to enter a 3-digit area code. To change a
previously–entered area code, use the
delete/transfer
to backspace.
5) Press
select/channel
. A confirmation tone sounds and the displayed area code is
entered.
6) Press
end
to complete the setting. The handset returns to standby mode.
Choosing the dialing mode
Most phone systems use tone dialing. However, some phone systems (such as those
in rural areas) still use pulse dialing. Your Uniden phone supports both tone and
pulse dialing. The default setting is tone dialing. If your dialing system uses pulse
dialing, follow the steps below to change the dialing mode:
