background image

G E N E R A L   I N F O R M A T I O N

[ 52 ]

www.uniden.com

General Information

The phone complies with FCC Parts 15 and 68.
Operating temperature: -10

°

C to 50

°

C (+14

°

F to +122

°

F)

AC Adapter Information

(For the main base)

(For the charging cradle)

AC Adapter part number:

AD-314

AD-310 or AD-1010

Input Voltage:

120V AC 60Hz

120V AC 60Hz

Output Voltage:

9V DC 350mA

9V DC 210mA

Battery Information

Battery part number:

BT-800

Capacity:

800mAh, 3.6V

Frequency

925.181-927.451 MHz
5739.320-5746.130 MHz

Recharge your phone on a regular basis by returning the handset to either cradle after each phone call. 
When the operating time becomes short, even after the battery is recharged, please replace the battery. 
With normal usage, the battery should last about one year. 

A replacement Uniden adapter or battery may be purchased by calling 1-800-554-3988 (Mon - Fri 8 am to 
5 pm, CST).

Specifications, features, and availability of optional accessories are all subject to change without prior
notice.

To avoid damage to the phone use only Uniden AD-314, AD-310 or AD-1010 and BT-800 (or BT-905 having less usage
time) with your phone.

• If the handset is left off the cradle, the actual Talk Mode duration will be reduced respective to the amount of time the handset is

off the cradle.

Summary of Contents for DXAI5588-2 Series

































































Reviews: