I N S T A L L I N G T H E P H O N E [ 8 ]
w w w . u n i d e n . c o m
B. Install the Rechargeable Battery Packs into the Handsets
Both handsets are powered by rechargeable battery packs. The
battery recharges automatically when the handset is placed in
the main base or charging cradle.
1) Press down on the handset battery case cover (use the finger
indention for a better grip) and slide the cover downward to
remove.
2) Plug the battery pack connector (red & black wires) into the
jack inside the battery compartment.
(The connector notches fit into the grooves of the jack only
one way.) Match the wire colors to the polarity label in the
battery compartment, connect the battery and listen for a
click to insure connection.
3) Make sure you have a good connection by slightly pulling on
the battery wires. If the connection is secure, the battery
jack will remain in place.
4) Place the battery case cover back in the handset by sliding it
upwards until it clicks into place.
Use only the Uniden
(BT-905 or BT-1006)
rechargeable battery
pack supplied with
your cordless
telephone.
!
INST
AL
LI
N
G
THE
PH
ONE
Summary of Contents for DXAI4288-2
Page 1: ...DXAI 4288 2...
