manualshive.com logo in svg

Uniden DXAI 5188-2 Series, Owner'S Manual, Page: 11 / 72

Share
Download
Uniden DXAI 5188-2 Series Owner'S Manual Download Page 11

GETTING ST

ARTED

G E T T I N G   S T A R T E D

[ 11 ]

www.uniden.com

• Place the power cord

where it does not
create a trip hazard
or where it could
become chafed and
create a fire or
electrical hazard.

5) Once the handset battery pack is fully charged, connect the

telephone line cord to the 

TEL LINE

jack and to a telephone

outlet.

Modular

If your telephone outlet isn't modular,
contact your telephone company 
for assistance.

If the main base 

charge/in use

or charging cradle 

charge

LED

light does not illuminate:
• Check to see if the AC adapter is plugged into both cradles

and the electrical wall outlet properly. (Use only the
supplied AC adapters. Do not use any other AC adapters.)

• Check to see if both handsets are sitting correctly in each

cradle and making good contact with each cradles charging
contacts.

• Place the handsets in

the main base and
charging cradle with
the keypad facing
forward for charging.

Summary of Contents for DXAI 5188-2 Series









































































Reviews:

No comments