Uniden DX 834 Series, Instruction Manual, Page: 17 / 28

Programming Your Phone
All programming functions must be completed when
your phone is in the standby mode because
programming keys do not function while you are on
the phone.
Storing a Number in Memory
Use these keys to store a number in memory.
Note: An error tone will sound and the programming
procedure will be canceled if more than 20 seconds
elapse between each keystroke entry or step.
1. Remove the Handset from the Base Unit.
2. Press
M
.
The TALK/BATT LOW LED blinks.
3. Enter the number
you want to store
(up to 16 digits).
5
5
5
1
2
1
2
4. If a pause is
needed during
dialing to access
a long distance
service, press
P
.
9 P
5
5
5
1212
Note: The
P
button counts as one digit. Pressing
P
more than once increases the length of
the pause between numbers.
5.
Press
M
again.
6. Enter the
memory location
(0-9).
A tone indicates
that the number
is stored.
DX834/DXC834 17