8) Flip the retainer from front to back,
then slide it into the slot so that the
lip of the retainer faces up and the
oval is at the bottom of the retainer.
This will hold the handset in place.
Direct wall
mounting
If you don’t have a standard wall plate, you can mount your phone
directly to the wall, Before doing this, consider the following:
Select a location away from electrical cables, pipes, or other items
behind the mounting location. Inserting screws into areas such as
this can be hazardous.
Try to mount your phone closer to a working phone
jack in order to avoid excessive cord lengths. Remember, you are
not mounting to a wall plate with a built in phone jack.
If the selected mounting area has no wooden support beams directly
behind it, you will need the appropriate anchoring devices in order
for the wall to properly support your phone.
Insert two mounting screws into
the wall, with their appropriate
anchoring device if necessary,
100mm apart. Allow about
5mm between the wall
and screwheads for mounting
the phone.
TOP
12
2) Remove the wall mount adapter
from the notches at the top of
the base.
3) Rotate the wall mount adapter
180 degrees and snap it into place
at the bottom of the base.
4)
Plug the AC adapter into the base.
5) Put the AC adapter cord inside the
molded wiring channel, then wrap it
around the strain relief notch. Plug
the AC adapter into a standard
240V AC wall outlet.
13
