!
Most phone systems use
tone dialing. Check with
your local phone company
if you’re not sure whether
your system is
tone or pulse.
18
Be sure the PULSE/TONE switch is in
the TONE position unless your local
phone system uses pulse dialing
▼
handset ringer volume
When the phone is either charging or in standby mode, pressing the
vol
▲
or key on the handset selects the handset ringer volume.
There are two ringer volume settings; high and low.
Handset earpiece volume
There are four volume settings for the handset earpiece; max high,
medium, and low. The handset earpiece volume can only be adjusted
during a call. To lower the volume, press
vol
▲
To raise the volume,
press
vol
▼
1. Press flash LED flashes.
2. Press 1, 2,3 or 4 on the keypad to select ringer tone.
To attach the beltclip
1)
Remove the slot cover.
2) Put the beltclip in the slot and press
down until it clicks.
To remove the beltclip
1) Pull back on the release tab and
pull the beltclip up.
2) Replace the slot cover. You can
store either the beltclip
or slot cover on the
bottom of the base.
