Uniden DECT2088 - DECT 2088 Cordless Phone Base..., User Manual

Page: 51 / 72

49 50
Using the
Answering
System
Screening Calls
From the base From the handset
While.the.system.is.taking.the.message,.simply.
listen.to.the.caller.over.the.base.speaker..
To.answer.the.call.and.speak.to.the.caller,.pick.
up.the.corded.handset.from.the.base.or.press...
[ ] .
To.mute.the.call.screen.and.allow.the.caller.to.
continue.leaving.the.message,.press.
[ ] .
•
•
•
While.the.systems.is.recording.the.message,.press..
[ /Mute] ..If.another.handset.is.screening.a.call,.you.will.
hear.a.beep.and.you.will.not.be.able.to.screen.the.call.
To.answer.the.call.and.speak.to.the.caller,.press.
[ /Flash] .
To.mute.the.call.screen.and.allow.the.caller.to.continue.
leaving.the.message,.press.
[ ] .or.return.the.handset.to.the.
cradle.
•
•
•
Turning Off the Message Alert Tone
When.all.new.messages.are.played.back,.the.message.alert.tone.will.automatically.deactivate..The.tone.will.not.
deactivate.until.all.new.messages.are.played.back..To.quickly.turn.off.the.tone,.press.any.key.on.the.base.
Operating the Answering System While You Are Away from Home
When.you.are.away.from.home,.you.can.operate.your.answering.system.with.any.touch-tone.telephone.
Setting a security code or
Personal Identification Number (PIN)
To.operate.your.answering.system.when.you.are.away.from.home,.you.will.need.to.enter.a.two-digit.security.code.or.
Personal Identification Number (PIN). The default security code is 80.
Press. [Menu/Select] ..
Select.the.ANSW..SETUP.menu,.and.then.the.SECURITY.CODE.submenu.
Use.the.number.keypad.( [0] .through. [9] ).to.enter.a.two-digit.security.code.(0-99).
Press. [Menu/Select]
. You will hear a confirmation tone.
Dialing in to your answering system
Note:. If.you.enter.an.incorrect.security.code/PIN.three.times,.you.will.hear.a.beep.and.the.answering.system.will.
return.to.standby.
)
2)
3)
4)
UC517BH(DECT2088) book OM 2.indb50 50 1/9/2008 11:08:04 AM