Uniden DECT2088 - DECT 2088 Cordless Phone Base... User Manual Download Page 17

Page: 17 / 72

Installing the Phone

Place the mounting slots over the

pins on the wall plate.

Slide the base

down to lock it

into place.

Wall plate

On the base unit, pull the handset

retainer out of the slot.

Rotate it clockwise 180 degrees and

flip the retainer from front to back.

Slide it back into the slot.

The retainer holds the corded

handset in place.

(To AC outlet)

Notes:.Mounting.the.phone.directly.on.the.wall

Be.sure.the.wall.is.capable.of.supporting.the.weight.
of.the.phone,.and.use.the.proper.type.of.anchoring.
device.for.the.wall.material.
Insert.two.#0.screws.(minimum.length.of..

inches,.not.supplied).into.the.wall,.3.

.inches.

apart..
Leave.the.screw.heads.

.inch.away.from.the.wall.to.

allow.room.for.mounting.the.phone..
Align.the.mounting.slots.over.the.screws.and.slide.
the.base.down.into.place.as.shown.above.

•

UC517BH(DECT2088) book OM 2.indb16 16

1/9/2008 11:07:38 AM

Summary of Contents for DECT2088 - DECT 2088 Cordless Phone Base...









































































Search results

Summary of Contents for DECT2088 - DECT 2088 Cordless Phone Base...

Reviews:

Related manuals for DECT2088 - DECT 2088 Cordless Phone Base...

Brands by name

Popular brands

Uniden DECT2088 - DECT 2088 Cordless Phone Base..., User Manual

Search results

Summary of Contents for DECT2088 - DECT 2088 Cordless Phone Base...

Reviews:

Related manuals for DECT2088 - DECT 2088 Cordless Phone Base...

Brands by name

Popular brands