
14
Installing the Phone
Resetting the Handset on page 60). Or to use multiple bases, see the next section.
Using Multiple Bases
The handsets supplied with your phone can be registered to a total of four different bases. Compatible bases include
the DECT 2015 and DECT 2035 series. (See our website or contact Customer Service for an up-to-date list of
compatible models.)
Note: To con
fi
rm how many bases the handset is registered to, open the
Select Base
submenu (follow the step 1 of
Selecting the base on page 15). Press
END
to close the list and return to standby.
Registering the handset to another base
To register a handset to another base:
Make sure the handset battery is fully charged.
If the other base has an LCD display:
With the phone in standby, press
MENU/SELECT
on the base. Move the cursor to select the Register
Handset menu, and then press
MENU/SELECT
. Handset Registering will appear.
If the other base
does
not
have an LCD display:
Disconnect the base AC adapter. Then press and hold the
Find Handset
key* while you reconnect the
adapter. Keep holding the Find Handest key until the charge LED starts to blink.
*This key might be labeled
Find
or
Find HS
.
On the handset, press
MENU/SELECT
. Select the Register Base menu. Handset Registering will appear in the
display. (After step 2, you have thirty seconds to complete this step 3 before the system returns to standby.)
Wait approximately thirty seconds. Registration complete will be displayed to indicate the handset has been
registered to the base and a handset ID will be automatically assigned. The handset assigns its own ID to this
base, too. (Since the base ID is based on the order in which the handset was registered to the different bases, a
base may have different IDs on each handset.)
If
Registration failed
appears in the LCD, please try these steps again.
Note: The handset will stay connected to the new base until you select a different base (see below).
1)
2)
•
•
3)
4)
DECT 2035+1 OM.indb 14
DECT 2035+1 OM.indb 14
15/7/08 12:00:00 PM
15/7/08 12:00:00 PM