4
Registering the Handset
You must register the handset to the base before you can use it.
Only one handset can be registered at a time. (If an accessory
handset has ever been registered to a base, you must reset the
handset before you can register it to a new base.)
Note: The model number for your telephone base is located
on the bottom of main base unit.
For DCT75 Series Bases
(DCT756, DCT7565,
DCT758, DCT7585)
To register to a DCT75 series
base, place the accessory
handset in the base. While
the handset is registering,
HANDSET REGISTERING
appears in the LCD. When
REGISTRATION COMPLETE
is displayed, the handset has
been registered to the base.
If REGISTRATION FAILED
appears, remove the handset
from the base and try again.
For Other Base Models
1. Select your base model from the list and follow the directions:
MODEL
DIRECTIONS:
DCT646
DCT746
Disconnect the base AC adapter. Press and hold
[find handset]
while you reconnect the adapter.
DCT6465
DCT6485
Disconnect the base AC adapter. Press and hold
[intercom]
while you reconnect the adapter.
DCT648
Disconnect the base AC adapter. Press and hold
[intercom/find handset]
while you reconnect the adapter.
DCT748
Disconnect the base AC adapter. Press and hold
[find hs/
]
and
[
]
while you reconnect the adapter.
DCT7488
Press the
MENU
soft key. Scroll down to HS
REGISTRATION and press the OK soft key.
DMX776
DMX778
Press and hold the registration button on the bottom of the
base until the base LEDs start blinking.
Summary of Contents for DCX750 - DCX 750 Cordless Extension Handset
Page 1: ......
Page 20: ...UUZZ01434BA 0...
