Install the AA Batteries
Charge the AA batteries for at least 17-20 hours before
completing the installation or using the handset.
1
Press down on the battery cover
release and slide the cover down
until it comes off.
2
Install the batteries supplied
with your phone. Check for
correct (+ -) polarity.
3
Securely close the battery
compartment cover by sliding
it until it snaps into place.
“
Please Register
” appears in
the display.
4
Place the handset in the charging
cradle with the keypad facing forward.
The DCX520 will only work with
“AA” Ni-MH rechargeable batteries.
If you use any other type of
batteries, the display will show “
Use
rechargeable battery only
”.
– 3 –
•
Use only “AA” rechargeable Ni-MH
batteries. Do Not use Alkaline, Lithium,
or non-rechargeable batteries.
To insure
maximum performance and safety, use
replacement batteries specifically matched for
this phone, contact
www.uniden.com
.
Using incorrect batteries could damage or
limit the performance of the handset and
could cause bodily injury.
• Recharge your handset on a regular basis by
returning the handset to the charger after
each phone call.
DCX520_UU820BH UU01820BZ_1 1/16/03 9:59 AM Page 3
