A B O U T S O F T K E Y F U N C T I O N
[ 9 ]
About Soft Key Function
In the standby mode
In the Talk mode
Soft key function consists of soft key icons and soft keys (No.1, 2, and 3). Each soft key
correspond to the icon displayed above, and each icon will be changed depending on the
operation. Press the corresponding soft key to enter a menu, select an item, or make your
selection. In this manual, we refer to this combination of icons and keys as the soft key.
For example, you will use the soft keys when you want to:
- Set up CIDCW options
- Access Caller ID messages stored
- Store or edit phone numbers
- Redial the last numbers dialed from the handset
- Register an extra handset
- etc….
S U N 1 1 : 5 9 P
H a n d s e t # 1
N e w : 1 0 0
MENU
CID RDL PB
Soft key 1
Soft key 2
Soft key 3
T a l k 9 9 9 : 5 9
1 2 3 4 5 6 7 8 9 0
MUTE
MENU
CWDX
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation.
Standby Mode
- The handset is not in use, is off the base, and
talk/flash
or
speaker
has not been pressed.
A dial tone is not present.
Talk Mode
- The handset is not in the base and
talk/flash
or
speaker
has been pressed enabling a dial tone.
“
Talk
” appears on the display.
Terminology
DCT5260_OM 10/1/02 5:29 PM Page 9
