Uniden DCT 7488 SERIES, Owner'S Manual, Page: 48 / 96

[ 4 7 ] P H O N E B O O K
w w w . u n i d e n . c o m
Speed Dialing
You can program up to ten speed dial numbers in each handset and the base. You
must program a speed dial number before you can use the speed dialing feature.
When the phone is in standby mode, press and hold a number key (
0 - 9 ) associated
with the speed dial location desired until the phone number appears; then press
talk/flash or , or pick up the corded handset. The number stored in that speed
dial location (SPD1 - SPD0) is then dialed.
Editing or Erasing a Stored Name, Phone
Number, Distinctive Ring and Speed Dial
1) When the phone is in standby mode, press .
To delete all phonebook locations, press /volume
up/down to select
De let e A ll
, and press select/ /
audio tone (or the OK soft key).
Dele te All ?
appears. Use /volume up/down to select
Y es
, and then press select/ /audio
tone (or the OK soft key). You will hear a confirmation tone.
2) Press /volume up/down to select
Dia l/E dit
, and then press
select/ /audio tone (or the OK soft key).
3) Use /volume up/down or the number keypad to select desired phonebook
entry (see "Viewing the Phonebook" on page 45).
4) When you have found the desired phonebook entry, press select/ /audio tone
(or the EDIT soft key) to edit the entry.
P
H
ONE
BOOK