Uniden DCT 5285, Owner'S Manual

Page: 34 / 84

B A S I C S [ 32 ]
Placing a Call on Hold
1) During a call, press intercom/hold (or int’com/hold
on the base). The call will be put on hold.
• You can hold a call for 5 minutes, when 5 minutes has passed, the call is disconnected and the
phone returns to the standby mode.
• While a call is on hold, CIDCW can not be received.
Once 10 seconds has passed or when you press the
end
key,
the call will be put on hold.
H o l d , t o t r a n s f e r
H a n d s e t # 2
H a n d s e t # 3
BACK BACK OK
MENU CID RDL PB
L i n e O n H o l d
H a n d s e t # 1
N e w : 1
Redialing a Call
The last three phone numbers dialed can be quickly
redialed.
Redialing from Standby Mode
1) Press the CID RDL PB soft key in the standby mode.
2) Press volume/
▲
or
▼
to select “ Redial History ”,
then press the OK soft key. The phone number that
was last dialed appears in the display.
3) Press volume/
▲
or
▼
to toggle through the last
three phone numbers dialed.
4) Press talk/flash or speaker . The selected number
is dialed.
5) To hang up, press the end key.
< R e d i a l 1 >
8 0 0 7 3 0 3 4 5 6
BACK DELETE
< R e d i a l 2 >
2 1 4 5 4 5 2 9 3 0
BACK DELETE
< R e d i a l 3 >
8 1 7 5 5 5 1 2 1 2
BACK DELETE
or
or
• If the number
exceeds 32 digits,
only the first 32
digits are retained
in redial memory.
• If the redial memory
is empty, you will
hear a beep.
• If you have not
pressed any key for
30 seconds, the
phone returns to the
standby mode.
• If you press the end
key, the operation
is canceled.
2) To talk to the caller, press talk/flash or speaker on a
handset (or (talk) on the base). The phone will
return back to the call.
DCT5285_UP304BH UP01304BA_1 5/23/03 3:08 PM Page 32