8
Overspeed
Alert
Tolerance
The Overspeed Alert Tolerance adds extra mph
(kph) to the upper speed set in Overspeed Alert
Management. This speed buffer gives the driver
a little bit of a buffer while driving. Once the
vehicle exceeds this buffer, the device sends a
warning tone. For example, if Overspeed Alert
Management is set to 40 mph and Overspeed
Alert Tolerance is set to 6 mph, a warning tone
sounds when the vehicle is traveling at over
46 mph.
Overspeed alert buffers are 3, 6, 9, 12 mph or
off (0 mph).
My Locations
Add/delete speed camera points.
Overspeed
Alert Mgmt.
This setting is the speed you want the vehicle
to stay under. For example, if you set this to 40
mph, the device gives you an alert tone when
you go over 40 mph. You can add a few mph
over this setting through the Overspeed Alert
Tolerance field as a buffer.
Video Setting
ImageSize
Choose recording size:
• 1080P/30fps
• 720P/60fps
• 720P/30fps
Auto Record
If set to On, recording starts automatically when
the device turns on.
Record Time
Select 2/3/5-minute recording interval for
circular recording purposes.
Date Stamp
Turn date stamp on video on or off.
WDR
(Wide Dynamic
Range)
Turn WDR on and off to balance an image’s
brightness/darkness levels.