English - 3
GETTING STARTED
Installing Your Phone
Charge the Battery
1.♦ Unpack♦all♦handsets,♦
battery♦packs,♦and♦battery♦covers.♦If♦
you♦need♦to♦remove♦a♦cover,♦press♦in♦
on♦the♦notch♦and♦slide♦the♦cover♦
down♦and♦off.
2.♦ Line♦up♦the♦battery♦connector♦with♦
the♦jack♦inside♦the♦handset;♦the♦
connector♦only♦fits♦one♦way.♦
3.♦ Push♦the♦connector♦in♦until♦it♦clicks♦
into♦place;♦tug♦gently♦on♦the♦wires♦
to♦make♦sure♦the♦battery♦is♦securely♦
connected.
4.♦ Replace♦the♦battery♦cover♦and♦slide♦it♦
into♦place.
5.♦ Use♦an♦AC♦adapter♦to♦connect♦the♦
power♦jack♦on♦the♦base♦to♦a♦regular♦
indoor♦(120V♦AC)♦power♦outlet.♦
Connect♦any♦chargers♦the♦same♦way.♦
6.♦ Place♦a♦handset♦in♦the♦base♦with♦the♦
display♦facing♦forward.♦If♦the♦display♦
doesn’t♦light♦up,♦reseat♦the♦handset♦or♦
connect♦the♦base♦to♦a♦different♦outlet.♦
For♦2♦or♦more♦handsets,♦place♦each♦
handset♦in♦a♦charger.♦
#
Charge all handsets completely
(about 15 hours) before using.
Connect the Telephone Cord
Use♦the♦telephone♦cord♦to♦connect♦the♦
TEL LINE
♦jack♦on♦the♦base♦to♦a♦standard♦
telephone♦wall♦jack.
Test the Connection
1.♦ Pick♦up♦the♦handset♦and♦press♦
Home/
FlasH
.♦The♦handset♦sounds♦a♦dial♦
tone,♦and♦the♦display♦shows♦
Talk
.♦
♦
–
If♦you♦don't♦hear♦a♦dial♦tone♦or♦the♦
display♦says♦
Check Tel Line,
check♦
the♦connection♦between♦the♦base♦
and♦the♦phone♦jack.♦
2.♦ Make♦a♦quick♦test♦call.♦(Press♦
end
♦to♦
hang♦up.)♦
♦
–
If♦you♦keep♦hearing♦a♦dial♦tone,♦
change♦to♦pulse♦dialing.
♦
–
If♦there’s♦a♦lot♦of♦noise,♦check♦for♦
interference♦(see♦page♦23).♦
3.♦ Test♦all♦handsets♦the♦same♦way.♦If♦
you♦can't♦get♦a♦dial♦tone,♦move♦the♦
handset♦closer♦to♦the♦base.♦
Changing to Pulse Dialing
Your♦phone♦uses♦tone♦dialing♦by♦default.♦
If♦your♦phone♦company♦uses♦pulse♦
dialing,♦you♦need♦to♦change♦your♦phone’s♦
dial♦mode.
1.♦ Press♦
menu/select
;♦choose♦
Global
Setup
.
2.♦ Select♦
Dial Mode
♦then♦
Pulse
.♦You’ll♦
hear♦a♦confirmation♦tone.♦
To♦send♦DTMF♦tones♦during♦a♦call♦(e.g.,♦
for♦an♦automated♦response♦system),♦
press♦
*
♦to♦temporarily♦switch♦to♦tone♦
dialing.♦When♦you♦hang♦up,♦the♦phone♦
automatically♦returns♦to♦pulse♦dialing.
Attaching the Belt Clip
Line♦up♦the♦holes♦on♦each♦side♦of♦the♦
handset.♦Insert♦the♦belt♦clip♦into♦the♦
holes♦on♦each♦side♦of♦the♦handset.♦Press♦
down♦until♦it♦clicks.
To♦remove♦the♦belt♦clip,♦pull♦either♦side♦
of♦the♦belt♦clip♦to♦release♦the♦tabs♦from♦
the♦holes.
Attaching Optional Wall Mount
Bracket
You♦can♦order♦a♦wall-mount♦bracket♦
from♦the♦Uniden♦website.♦Follow♦the♦
instructions♦that♦come♦with♦the♦bracket.