22 - English
To...
From the base
From a handset
delete a
message
While a message is playing, press
delete
.
While a message is
playing, select
4
(number
key).
delete all
messages
With the phone in standby, press
delete
; press
delete
again to confirm. Not available.
play old
messages
After the system plays all new messages,
press
play/stop
again.
select
2
(number key).
stop playback
Press
play/stop
.
Select
5
(number key).
Screening Your Calls
You♦can♦use♦the♦answering♦system♦for♦call♦screening.♦While♦the♦system♦takes♦a♦
message,♦you♦can♦listen♦on♦the♦base♦speaker♦(if♦you♦turn♦on♦
Call Screen)
♦or♦from♦a♦
handset.♦Only♦one♦handset♦can♦screen♦calls♦at♦a♦time.♦If♦another♦handset♦tries♦to♦
screen♦calls,♦it♦beeps♦and♦returns♦to♦standby.
To...
From the base
From a handset
hear the caller leaving a
message
Listen to the caller over
the speaker.
Press
message/mute
.
answer the call
NA
Press
Home/FlasH
.
mute the call screen
without answering*
Press
play/stop
.
Press
end
or return the
handset to the cradle.
*♦♦If♦you♦mute♦the♦call♦screen,♦the♦system♦continues♦taking♦the♦message:♦it♦just♦stops♦
playing♦through♦the♦speaker.♦
Using the System While You're Away from Home
You♦can♦dial♦in♦to♦your♦answering♦system♦from♦any♦touch-tone♦phone.♦Before♦you♦
can♦use♦this♦feature,♦you♦must♦program♦a♦security♦code.
Programming a Security Code
With♦the♦phone♦in♦standby,♦open♦the♦menu;♦select♦
Answering Setup
,♦then♦select♦
Security Code
.♦Use♦the♦number♦keypad♦to♦enter♦a♦two-digit♦security♦code♦(
01
♦to♦
99
).♦
Press♦
menu/select
♦when♦you’re♦finished.
#
Remember to make a note of your new security code!
Dialing In to Your System
1.♦ Call♦your♦phone♦number♦&♦wait♦until♦the♦system♦answers.♦(If♦the♦system♦is♦turned♦
off,♦it♦answers♦after♦10♦rings♦&♦sounds♦a♦series♦of♦beeps.)
2.♦ During♦the♦greeting♦or♦beeps,♦press♦
0
♦and♦
immediately
♦enter♦your♦security♦code.♦
If♦you♦enter♦it♦incorrectly♦3♦times,♦the♦system♦hangs♦up♦and♦returns♦to♦standby.