background image

Prec

autions & W

a

rranty

P r e c a u t i o n s   &   W a r r a n t y   [ 8 2 ]

w w w . u n i d e n . c o m

Precautions!

Before you read anything else, please observe the following:

Warning!

Uniden America Corporation DOES NOT represent this unit to be 
waterproof. To reduce the risk of fire, electrical shock, or damage to the 
unit, DO NOT expose this unit to rain or moisture.

Rechargeable Nickel-Metal-Hydride Battery 
Warning

• This equipment contains rechargeable Nickel-Metal-Hydride batteries.
• The rechargeable batteries contained in this equipment may explode 

if disposed of in a fire.

• Nickel is a chemical known to state of California to cause cancer.
• Do not short-circuit the battery.
• Do not charge the rechargeable batteries used in this equipment in 

any charger other than the one designed to charge these batteries as 
specified in the owner's manual. Using another charger may damage 
the battery or cause the battery to explode.

Rechargeable Batteries Must Be Recycled or 
Disposed of Properly

The exclamation point within an equilateral 

 is 

intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in 
the literature accompanying the appliance.

Uniden works to reduce lead content in our PVC coated cords in our 
products and accessories.

Warning!

The cords on this product and/or accessories contain lead, a chemical 
known to the State of California to cause birth defects or other 
reproductive harm. 

Wash hands after handling

.

Important Safety Instructions

When using your telephone equipment, basic safety precautions should 
always be followed to reduce the risk of fire, electric shock and injury 
to persons, including the following: 

1. Do not use this product near water, for example, near a bath tub, 

wash bowl, kitchen sink or laundry tub, in a wet basement or near a 
swimming pool. 

2. Avoid using a telephone (other than a cordless type) during an 

electrical storm. There may be a remote risk of electric shock from 
lightning. 

3. Do not use the telephone to report a gas leak in the vicinity of the 

leak. 

4. Use only the power cord and batteries indicated in this manual. Do 

not dispose of batteries in a fire. They may explode. Check with 
local codes for possible battery disposal instructions. 

5. Do not disassemble any component of this product.

SAVE THESE INSTRUCTIONS 

CAUTION

Risk of explosion if battery is replaced by an incorrect type. Dispose of 
used batteries according to the instructions. Do not open or mutilate 
the battery, and disconnect the battery before shipping this product.

The FCC Wants You To Know

This equipment complies with Part 68 of the FCC rules and the 
requirements adopted by the ACTA. On the bottom of this equipment is 
a label that contains, among other information, a product identifier in 
the format US:AAAEQ##TXXXX. If requested, this number must be 
provided to the telephone company.

An applicable Universal Service Order Codes (USOC) certification for the 
jacks used in this equipment is provided (i.e., RJ11C) in the packaging 
with each piece of approved terminal equipment. 
A plug and jack used to connect this equipment to the premises wiring 
and telephone network must comply with the applicable FCC Part 68 
rules and requirements adopted by the ACTA. A compliant telephone 
cord and modular plug is provided with this product. It is designed to 
be connected to a compatible modular jack that is also compliant. See 
installation instructions for details.

The REN is used to determine the number of devices that may be 
connected to a telephone line. Excessive RENs on a telephone line may 
result in the devices not ringing in response to an incoming call. In 
most but not all areas, the sum of RENs should not exceed five (5.0). 
To be certain of the number of devices that may be connected to a line, 
as determined by the total RENs, contact the local telephone company. 
For products approved after July 23, 2001, the REN for this product is 
part of the product identifier that has the format US:AAAEQ##TXXXX. 
The digits represented by ## are the REN without a decimal point (e.g., 
03 is a REN of 0.3). For earlier products, the REN is separately shown 
on the label.

If this equipment causes harm to the telephone network, the telephone 
company will notify you in advance that temporary discontinuance of 
service may be required. But if advance notice isn't practical, the 
telephone company will notify the customer as soon as possible. Also, 
you will be advised of your right to file a complaint with the FCC if you 
believe it is necessary.

The telephone company may make changes in its facilities, equipment, 
operations or procedures that could affect the operation of the 
equipment. If this happens the telephone company will provide 
advance notice in order for you to make necessary modifications to 
maintain uninterrupted service.

Please follow instructions for repairing, if any (e.g. battery 
replacement section); otherwise do not substitute or repair any parts 
of the device except as specified in this manual.
Connection to party line service is subject to state tariffs. Contact the 
state public utility commission, public service commission or 
corporation commission for information.
This equipment is hearing aid compatible.

Should you experience trouble with this equipment, please contact 
Uniden customer service at 800-297-1023. If the equipment is causing 
harm to the telephone network, the telephone company may request 
that you disconnect the equipment until the problem is resolved.

NOTICE: According to telephone company reports, AC electrical surges, 
typically resulting from lightning strikes, are very destructive to 
telephone equipment connected to AC power sources. To minimize 
damage from these types of surges, a surge arrestor is recommended.

Changes or modifications to this product not expressly approved by 
Uniden, or operation of this product in any way other than as detailed 
by the owner's manual, could void your authority to operate this 
product.

This device complies with part 15 of the FCC rules. Operation is subject 
to the following two conditions: (1) This device may not cause harmful 
interference, and (2) This device must accept any interference 
received, including interference that may cause undesired operation. 
Privacy of communications, may not be ensured when using this phone.
To insure the safety of users, the FCC has established criteria for the 
amount of radio frequency energy various products may produce 
depending on their intended usage. This product has been tested and 
found to comply with the FCC's exposure criteria. For body worn 
operation, the FCC RF exposure guidelines were also met when used 
with the Uniden accessories supplied or designed for this product. Use 
of other accessories may not ensure compliance with FCC RF exposure 
guidelines and should be avoided.

Radio Interference

Radio interference may occasionally cause buzzing and humming in 
your cordless handset, or clicking noises in the base. This interference 
is caused by external sources such as TV, refrigerator, vacuum cleaner, 
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If 
these noises continue and are too distracting, please check around 
your home to see what appliances may be causing the problem. In 
addition, we recommend that the base not be plugged into a circuit 
that also powers a major appliance because of the potential for 
interference. Be certain that the antenna on the unit is fully extended 
when needed.
In the unlikely event that you consistently hear other voices or 
distracting transmissions on your phone, you may be receiving radio 
signals from another cordless telephone or other source of interference. 
If you cannot eliminate this type of interference, you need to change 
to a different channel.

Precautions & 

Summary of Contents for CLX 485 Series





























































































Reviews: