Chang
i
ng
the
Di
gital
[ 1 5 ] C h a n g i n g t h e D i g i t a l S e c u r i t y C o d e
w w w . u n i d e n . c o m
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset and
the base unit. Normally, setting the code is not necessary. In the rare situation that
you suspect another cordless telephone is using the same security code, you can
change the code. To change the digital security code:
1. "System Reset" options ("De-register the Handset" and "Replacing the Base
Setting") for all the handsets you have (see page 69).
2. Re-register each handset by following the steps on page 14.
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of the handset.
Press down until it clicks.
To remove the beltclip
Pull either side of the beltclip to release the tabs from the
holes.
Summary of Contents for CLX 465 SERIES
Page 1: ...CLX 465 SERIES OWNER S MANUAL...
Page 77: ...Memo...
Page 78: ...Memo...
Page 80: ...UPZZ01745BZ N PRODUCT AY...
