![Uniden CAM 500 Important Safety Instructions Manual Download Page 4](http://html1.mh-extra.com/html/uniden/cam-500/cam-500_important-safety-instructions-manual_3771649004.webp)
according to local laws and regulations.
TROUBLESHOOTING
IF...
TRY THIS...
You cannot record video or take
photos.
•
Check the microSD card; it might be out
of space. Either delete files from that
microSD card or use a new microSD
card.
•
Check if the microSD card is locked.
Unlock it if so.
“File Error” appears when photos
or video are replayed.
Format card error. Reformat your
microSD card.
Video is unclear.
Clean the lens.
You cannot access menus.
Press
OK
to stop recording.
SPECIFICATIONS
Screen
2.0 in. LCD
RAM
DDR3
Storage
microSD (up to 32GB)
AV Input/Output
USB 2.0
HDMI
Power Supply
250mAh Built-in Polymer Llithium battery
(10 min)
Power Type
12V Car Charger
Sensor Type
CMOS
View Angle (each lens)
140
°
(diagonal)
Optical Zoom
4X digital zoom
Image Sensor, inch
1/3
Video Frame Rate
30fps
Sound Recording
Yes (built-in microphone)
Channels
1
G-sensor
Yes
GPS
No
Video Format
MOV
Photo Resolution
16M/12M/10M/8M/5M/3M
Video Codec
H.264 (avc1)
Audio Codec
PCM
Operating Systems
Supported
Windows 2000/XP/Vista/7/8/8.1
Mac OS 10+/LINUX (webcam and storage)
Operating Temperature
14
°
F ~ 140
°
F
-10
°
C ~ +60
°
C
Storage Temperature
-4
°
F ~ 158
°
F
-20
°
C ~ +70
°
C
Working Humidity
10 ~ 90%
FCC/INDUSTRY CANADA INFORMATION
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Unauthorized changes or modifications to this equipment may void
compliance with the FCC Rules. Any change or modification must be
approved in writing by Uniden. Changes or modifications not approved by
Uniden could void the user’s authority to operate the equipment.
L’appareil est conforme aux normes d’Industrie Canada. Son fonctionnement
est soumis aux deux conditions suivantes : (1) Ce dispositif ne doit pas
causer d’interférences et (2), il doit pouvoir accepter les interférences,
incluant celles pouvant nuire à son fonctionnement normal.
Tous les changements apportés à cet appareil, s’ils ne sont pas
expressément approuvés par Uniden ou toute utilisation de celui-ci d’une
autre manière que celle décrite dans ce guide peut annuler votre autorisation
de le faire fonctionner.
- 7 -
- 6 -
Summary of Contents for CAM 500
Page 6: ......