Uniden CAM 500, Important Safety Instructions Manual

Page: 2 / 6

• 2.0” screen • Recording to microSD card
• G-Sensor with Collision Detection
Mode
WHAT’S IN THE BOX
• Camera/Recorder • Windshield Mount
• Car Adapter • HDMI Cable
• MiniUSB-USB Cable • Owner’s Manual
If any items are missing or damaged, contact our Customer Care Line
immediately at 800-297-1023. Never use damaged products!
Need help? Get answers 24/7 at our website: www.uniden.com .
CONTROLS AND INDICATORS
microSD slot
Locking ring
Power on/off
MENU
IR LEDs
Lens
Left side (not shown)
Power Input
Microphone
HDMI Jack
Mode
or Back
OK
(Record start/stop
Select item)
Scroll
down
Scroll
up
Power on LED
Camera release
latch
INSTALLING THE CAM500
Installation Safety Warnings
WARNING! Failure to comply with the following warnings could result in an
accident or collision, resulting in death or serious injury.
Do not obstruct the driver’s view or the operation of the vehicle itself.
Do not place it unsecured on the dashboard or in front/above an airbag.
Do not mount the camera where it will become a distraction if it becomes loose.
Do not attempt to operate the camera while driving.If you need to access the
CAM500 to change settings, etc,, pull off the road in a safe manner to do so.
Some state laws prohibit drivers from mounting anything on the windshield,
or restrict mounting to specific areas of the windshield. It is the owner’s
responsibility to mount the CAM500 in compliance with local laws.
1. Slide the CAM500 onto the bracket hook on the top of the windshield mount until
it locks into position.
2. Be sure the locking ring is set to
UNLOCK
. Press the suction cup base to the
windshield.
3. Turn the locking ring to LOCK . Make sure the stand is locked to the windshield.
4. Connect the car adapter to the unit and to the cigarette lighter power jack.
5. Press
POWER to turn the unit on and check the view. Adjust the angle if
needed.
6. To unmount the stand, turn the locking ring to the UNLOCK position then lift the
plastic flap on the base to release it from the windshield.
OPERATION
SET UP THE CAM500
If you are recording (red dot on the screen is flashing), press OK to stop
recording. You cannot enter the menus if CAM500 is recording.
Press MODE then M to set up your camera. Select a mode [Video, Still (photo),
or Playback] and then press M to display the settings for that mode. The menus
for Video and Still have 2 options – that mode plus Setting. Playback lets you
delete and protect files on the microSD card (not included - class 10 microSD card
recommended).
Video Mode
Press MODE until displays in the upper left corner of the screen. Press M once to
display the Video menu options and twice to display the Setting menu options.
VIDEO MENU
SETTING MENU
Resolution Date/Time
Loop Recording Car/Driver ID
Exposure Auto Power Off
Motion Detection Key Click Sound
Record Audio Language
G Sensor TV Mode
Date Stamp Frequency
Monitor Parking Screen Saver
Parking Sensitivity IR LED
- 3 - - 2 -