17
Smart Care
Motion Detection detects any movement within camera view;
Noise Detection
(VOX) and Cry Detection identifies the volume of the baby’s sound or crying.
When any of the detection is above the set threshold, the monitor screen will lit up
when it is in sleep mode or the screen is in standby mode.
1. Press the
MENU
button on the monitor, and select
> Smart Care
.
2. Press UP and DOWN direction buttons to select between motion detection,
noise detection, cry detection and alarm volume, and press OK to confirm
selection.
3. When setting up any the detection mode, press UP and DOWN direction buttons
to adjust sensitivity or turn On/Off.
4. When set up the alert volume, UP and DOWN direction buttons to set the
volume level.
5. Press OK to save settings.
6. There will be an alert when the detection is triggered, press OK to stop the alert.
Sleep Mode
S
et the monitor to automatically enter sleep mode according to the length of time
set to increase the monitor standby time. Any of the detection triggered will
turn
the LCD back on. If none of the detection is active, press the power button on the
monitor to turn the LCD back on.
1. Press the
MENU
button on the monitor, and select
> Sleep Mode
.
2. Select the time length desired for the monitor to enter sleep mode.
3. Press OK to save settings.
#
Please note that only the Camera 1 Smart Care features is active in sleep mode
if two cameras are added to the monitor. screen is in sleep mode.
Date and Time
S
et the monitor to automatically enter sleep mode according to the length of time
set to increase the monitor standby time. Any of the detection triggered will
turn
the LCD back on. If none of the detection is active, press the power button on the
monitor to turn the LCD back on.
1. Press the
MENU
button on the monitor, and select
> Date and Time
.
2. Select the time length desired for the monitor to enter sleep mode.
3. Press OK to save settings.
