68
•
Beep+Light
(the scanner beeps and the
backlight turns on when it receives a Close
Call signal)
•
None
(the scanner does not alert)
Select Beep
•
Off
(the scanner does not beep)
•
Alert 1-9
- (the scanner sounds an alert
beep to notify you of a Close Call hit. When
you select an alert level, the scanner
automatically enters the setting of the Alert
volume level. You can choose different beep
types.)
Set CC Pause
: Lets you select how long the
scanner waits after a hit before it returns to the
previous operation.
•
3/5/10/15/30/45/60 sec
.
• Infinite.
Turn the scroll control to display an option, then
press the scroll control to select it.
•
Set CC Bands
: Lets you select the Close Call
band settings. You can turn the following bands
on or off.
VHF Low1
(25.0000 - 53.9875 MHz) Band Plan1
(25.0000 - 53.9950 MHz) Band Plan2
(25.0000 - 53.9937 MHz) Band Plan3
VHF Low2
(54.0000 - 107.9500 MHz)
Air Band
(108.0000 - 136.9875 MHz) Air 12.5k
(108.0000 - 136.9916 MHz) Air 8.33k
VHF High1
(137.0000 - 224.9950 MHz)
VHF High2
(225.0000 - 319.9500 MHz)
UHF
(320.0000 - 512.0000 MHz)
(806.0000 - 1300.0000 MHz)
Use the scroll control to select a band, press
the scroll control, then use the scroll control to
select
On
or
Off
and press the scroll control.
Turning off undesired bands speeds up Close
UB347ZH.fm Page 68 Thursday, August 31, 2006 11:57 AM
