6
6.
Channel Selector/MENU/OK
. Press the inner
MENU/OK
button to
select a menu option or other selection. Turn the outer
Channel
Selector
knob to:
Select channels
Select menu modes
Change scan resume direction (up or down)
Control Talkback volume
Control Mic gain level
Control Calibration volume
All channels except Channel 9 may be used for normal communication. The FCC
reserves Channel 9 for emergencies involving the immediate safety of individuals
or protection of property. Use Channel 9 to render assistance to a motorist.
This is an FCC rule and applies to all CB operators.
7. Microphone socket.
8. Indicators turn on when the function is turned on.
9.
S/RF/CAL/SWR
: Push to to check RF signal strength, calibration,
and SWR reading.
10.
CB/PA:
Selects
CB
(Citizens Band) or
PA
(Public Address).
Do not use the
pa
function unless an external speaker is connected.
11.
MEM/SCAN
: Press to start or stop scanning modes [All Channel
Scan (see page 10) and Memory Scan (see page 12)]. Press and hold
to set or clear channel memory while in Memory mode.
12.
9/19/NORM
: Press to switch between emergency channel 9,
channel 19, and standard CB channels.
13. Frequency Display: Displays the MHz of the selected channel. Also
displays menu options.
14.
ANL:
Turns
ANL
(Automatic Noise Limiter) feature on and off.
ANL
reduces external noise.
15.
NB:
Turns
NB
(Noise Blanker) feature on and off.
NB
reduces
interference from vehicle ignition systems.
16.
RF Gain
knob: Improves reception in strong signal areas.
Summary of Contents for BEARCAT 880
Page 1: ...Owner s Manual Printed in China U01UT390ZZZ 0 880...
Page 22: ......
