Uniden BCD996XT, User Manual

Page: 5 / 130

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html
Name
Edit Name
Quick key
Set Quick Key
Optional
Location
information
Set Location
Info
Lockout
Set Lockout
Available operations
Delete a group
Delete Group
Create at least 1 channel in each group
Each conventional system can contain up to 1000 channels in each group, and all groups must contain at least 1 channel.
1. On the Edit Group menu, select the channel group you just created.
2. Go to the Edit Channel menu and select New Channel .
3. Input the frequency for this channel in MHz.
4. If you need to change any of the channel properties, you can do that now. Unless a property is Required , you can operate
the system without changing the default settings.
Channel properties
(All of these options can be found by selecting the channel name your scanner's Edit Channel menu. If necessary, the sub-menu
and the exact option name are listed beside each property.)
Property Option name
Required
Frequency
Edit Frequency
Recommended
Analog/digital
BCD396XT and BCD996XT : Set Audio Type
BC346XT and BCT15X : Not available
●
CTCSS/DCS
Set CTCSS/DCS ( BCD396XT : analog channels only)
●
P25 Network Address (NAC)
BCD396XT and BCD996XT : P25 NAC Option (digital channels
only)
BC346XT and BCT15X : Not available
Modulation
Set Modulation
5 AM file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html (3 of 4)4/7/2009 10:08:2