E-14
Uniden Atlantis 290/295 Radio Owner’s Manual
x
For the best sound quality, hold the microphone about
two inches away from your mouth.
x
See the channel lists starting on page E-26 for a list of
receive-only channels.
Boost the transmission power
In most situations, low transmission power is all you need.
If you find yourself far away from other stations and have
trouble getting a response, you may need to boost the
transmission power from MID or LO to HI:
1. Select the channel you want to transmit on.
2. Press and hold
ENT
/
L/M/H
to change transmission
power level.
3. The display shows the new transmission power in the
upper left of the display. The transmit power remains at
the new setting until you change it again.
Note: Don’t forget to change the transmission setting
back to LO when you move close to other stations.
Some Marine VHF channels (for example, channels 13 and
67) limit the transmission power to 1 Watt. When you tune to
a limited-power channel, the radio automatically switches to
1 Watt. See the channel lists starting on page page E-26 for
a list of power-restricted channels.
Save a Channel to Memory
When you find a channel you’d like to keep, press and hold
SCAN/MEM
. Whenever you are on that channel,
MEM
displays. Press and hold
SCAN/MEM
again to remove that
channel from memory.
Scan Channels in Memory
Press
SCAN/MEM
to scan channels saved to memory. Press
SCAN/MEM
again
to stop scanning.
MENUS
The Atlantis 290/295 menu system lets you establish
parameters for the radio’s operation. You can access menus