E-14
Uniden Atlantis 150 Owner’s Manual
1. Press
SQL/UIC
.
SQL
displays and the current squelch level
flashes.
2. Press
SQL/UIC
while the squelch level displays
in order
to change the squelch level to the next
step
(0 - 3, then repeating again from 0)
.
3. Press and hold
SQL/UIC
to
save and
exit the
squelch setting.
A 2 second timeout also exits
squelch setting.
TRANSMITTING AND RECEIVING
Selecting Channel Modes
The radio uses U.S., Canadian, and International Marine
Channels (modes). Press and hold
SQL/UIC
to change
modes. Each time you press and hold
SQL/UIC
, the mode
indicator changes (
US
- United States;
CAN
- Canada; none
- International). Refer to page 25 for a list of the available
channels and corresponding frequencies.
NOTE
Each time you change the UIC mode, Triple Watch, EMG
CH16/CH9CH
,
WX mode, and WX Alert mode are canceled.
The system does not remember these settings between
modes.
Memory channels are saved to their specific UIC mode.
Transmitting
The radio can transmit for up to 3 minutes.
TX
displays when
transmitting. After 3 minutes of continuous transmission,
transmission is canceled and an error tone sounds.
The radio transmits at 0.7W and 2.5W.
Boosting Transmission Power
1. Hold the radio approximately 2 inches in front of your mouth
with the antenna at approximately 45º angle away from your
head.
2. Press
BOOST on the side of the radio
to change the transmit power from Low
HI
SQL