Inside Front Cover – page 10
accordian fold
page 11
page 12
page 13
page 14
page 15
page 16
page 17
Front Cover
page 18
AppCam 40PT
1080p Pan / Tilt | WiFi Camera
Quick Start Guide
1080p
Full HD
Two-way
Audio
No
Fees
Pan
Tilt
Night
Visıon
Remote
Viewing
STATEMENT OF REMEDY:
In the event that
the product does not conform to this warranty
at any time while this warranty is in effect,
warrantor will either, at its option, repair or
replace the defective unit & return it to you
without charge for parts, service, or any other
cost (except shipping & handling) incurred by
warrantor or its representatives in connection
with the performance of this warranty.
Warrantor, at its option, may replace the unit
with a new or refurbished unit. Warrantor is
not responsible for any additional costs
associated with reinstallation of product.
THE LIMITED WARRANTY SET FORTH
ABOVE IS THE SOLE & ENTIRE WARRANTY
PERTAINING TO THE PRODUCT AND THE
CONTENTS CONTAINED IN THE ORIGINAL
FACTORY PACKAGING & IS IN LIEU OF &
EXCLUDES ALL OTHER WARRANTIES OF
ANY NATURE WHATSOEVER, WHETHER
EXPRESS, IMPLIED OR ARISING BY
OPERATION OF LAW, INCLUDING, BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. THIS WARRANTY
DOES NOT COVER OR PROVIDE FOR THE
REIMBURSEMENT OR PAYMENT OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES
TO THE PRODUCT CAUSED BY IMPROPER
INSTALLATION OF THE PRODUCT. THIS
WARRANTY DOES NOT COVER ANY COSTS
RELATING TO THE REMOVAL, REPLACEMENT,
OR INSTALLATION OF ANY PRODUCT.
Uniden Corporation
Limited 1 Year Warranty
Important: Keep your receipt. Proof of
original purchase is required for warranty
service.
WARRANTOR:
Uniden America Corporation
(“Uniden”) ELEMENTS OF WARRANTY:
Uniden warrants, for one year, to the original
retail owner, this Uniden Product to be free
from defects in materials & craftsmanship with
only the limitations or exclusions set out
below. Uniden only warrants the Products
contained in the original factory packaging.
WARRANTY DURATION:
This warranty to the
original user shall terminate & be of no further
effect 12 months after the date of original
retail sale. The warranty is invalid if the
Product is (A) damaged or not maintained as
reasonable or necessary, (B) modified, altered,
or used as part of any conversion kits,
subassemblies, or any configurations not sold
by Uniden, (C) improperly installed, (D)
serviced or repaired by someone other than
an authorized Uniden service center for a
defect or malfunction covered by this
warranty, (E) used in any conjunction with
equipment or parts or as part of any system
not manufactured by Uniden, or (F) installed
or programmed by anyone other than as
detailed by the owner’s manual for this
product.
Copyright ©2017 Uniden America Corporation, Irving
Texas. ALL RIGHTS RESERVED.
Some states do not allow this exclusion or
limitation of incidental or consequential
damages so the above limitation or exclusion
may not apply to you.
LEGAL REMEDIES:
This warranty gives you
specific legal rights, & you may also have
other rights which vary from state to state.
This warranty is void outside the United States
of America & Canada.
PROCEDURE FOR OBTAINING
PERFORMANCE OF WARRANTY:
If, after
following the instructions in the owner’s
manual you are certain that the Product is
defective, pack the Product carefully
(preferably in its original packaging). The
Product should include all parts & accessories
originally packaged with the Product. Include
evidence of original purchase & a note
describing the defect that has caused you to
return it. The Product should be shipped
freight prepaid, by traceable means, to
warrantor at:
Uniden America Service
c/o Saddle Creek
743 Henrietta Creek Rd., Suite 100
Roanoke, TX 76262
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation
exposure limits set forth for an uncontrolled
environment and it also complies with Part 15
of the FCC RF Rules. This equipment must be
installed and operated in accordance with
provided instructions and the antenna(s) used
for this transmitter must be installed to
provide a separation distance of at least 20 cm
Regulatory Information
FCC Information
Please note that changes or modifications not
expressly approved by the party responsible
for compliance could void the user’s authority
to operate the equipment.
FCC Compliance
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation.
FCC Statement
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
from all persons and must not be co-located
or operating in conjunction with any other
antenna or transmitter. End-users and
installers must be provided with antenna
installation instructions and consider removing
the no-collocation statement.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any interference
received, including interference that may
cause undesired operation
Symbol Conventions
Provides additional
information to emphasize or
supplement important
points of the main text.
Indicates a potentially
hazardous situation, which if
not avoided, could result in
equipment damage, data
loss, performance
degradation, or unexpected
results.
Safety Instructions
These instructions are intended to ensure that
a user can use the product correctly to avoid
danger or property loss.
Proper configuration of all passwords and
other security settings is the responsibility of
the installer and/or end-user.
• In the use of the product, you must be in
strict compliance with the electrical safety
regulations of your area.
• Do not connect several devices to one power
adapter as adapter overload may cause
over-heating or a fire hazard.
• Please make sure that the plug is firmly
connected to the power socket. When the
product is mounted on wall or ceiling, the
device shall be firmly fixed.
WARNING
• Make sure the power supply voltage is
correct before using the camera.
• Do not drop the camera or subject it to
physical shock.
• Do not touch sensor modules with fingers. If
cleaning is necessary, use a clean cloth with
a bit of ethanol and wipe it gently. If the
camera will not be used for an extended
period, replace the lens cap to protect the
sensor from dirt.
• Do not aim the camera at the sun or extra
bright places. Blooming or smearing may
occur, and affect the sensor’s endurance at
the same time.
• The sensor may be burned out by a laser
beam, so when any laser equipment is in use,
make sure that the surface of sensor will not
be exposed to the laser beam.
• Do not place the camera in extremely hot,
cold (the operating temperature shall be
-10°C to +40°C), dusty, or damp locations,
and do not expose it to high electromagnetic
radiation.
• To avoid heat accumulation, ensure that
there is good ventilation to the device.
• Keep the camera away from liquids.
• If the product does not work properly,
please contact your retailer or Uniden
customer service.
• Never attempt to disassemble the camera
yourself. (We shall not assume any
responsibility for problems caused by
unauthorized repair or maintenance.)
WARNING
IMPORTANT
