manualshive.com logo in svg

Uniden 9035, Owner'S Manual, Page: 52 / 68

Share
Download
Uniden 9035 Owner'S Manual Download Page 52

5

52

Maintenance

52

Maintenance

Specifications

Operating temperature

32° F to 22° F (0° C to 50° C)

AC adapter

Base

Charging cradle

Part number

AAD-04S

AAD-600S

Input voltage

240V AC, 50 Hz

240V AC, 50 Hz

Output voltage

9V DC @ 350mA

9V DC @ 20mA

Battery pack

Part number

BT-694

Notes:

Use only the supplied AC adapters.

Be sure to use the proper adapter for the base and any chargers.

Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or 

electrical hazard.

Do not place the base in direct sunlight or subject it to high temperatures.

Battery Information

Battery life

With average use, your handset battery provides more than ten hours of talk time and approximately seven days 

of standby time. You can achieve optimum battery life and performance by returning the handset to the base or 

charging cradle after each use. When your handset is left off of the cradle, the battery will gradually discharge even 

if the handset is not being used. The actual talk time duration will be reduced in proportion to the amount of time the 

handset is off of the cradle.

•

•

•

•

DECT ELITE OM.indb   51

13/3/08   3:21:37 PM

Summary of Contents for 9035





































































Reviews:

No comments