Inserting the micro SD card
Inserting / Removing the Micro SD card
Use Only compatible micro SD cards approved by UniData for use with this device. UniData uses approved industry standards
for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card, the
device and corrupt data stored on the card.
The phone supports micro SD cards up to 8GB.
1.
Open the side cover of the micro SD slot.
2.
Insert the card into the micro SD card slot with the contact surface facing down, and press it until it locks into place.
3.
Close the side cover.
Remove the micro SD card
1.
Make sure that no application is currently accessing the micro SD memory card.
2.
Open the side cover of the micro SD slot.
3.
Press the micro SD card slightly in to release lock, and pull the card out.
Important: Do not remove the memory card in the middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the
card may be corrupted.
You can remove or replace the micro SD card during phone operation without switching the device off.
8
