Manual – 3000 NRL Family
Unidata Manual - 3000 NRL Family - 17 09 2018.docx
Page 15
3.3.2 Communication Parameters
Parameter Notes
Force Neon comms
Force a communications cycle to occur immediately instead of at
the scheduled time.
Initialise NRL
Connects to the Neon Server, downloads the scheme for the
configured NRT ID, and starts logging.
NRT ID
A number assigned by the Neon Server that identifies the NRT /
NRL. Ranges from 1 through 4,294,967,295.
Set Neon IP
The IP address of the Neon Server.
Ethernet priority
These parameters set the communications priority for the various
communications interfaces.
A higher number indicates a higher priority.
A priority of '0' indicates the interface is not used.
3G/4G SIM1 priority
3G/4G SIM2 priority
Serial (Satellite) priority
Serial (X-Bee) priority
Set SIM1 APN
Access Point Name and corresponding Username and Password
for the SIM1 / SIM2 / Satellite communications interfaces. Access
Point Names must be in double-quotes (") otherwise the setting will
be treated as a telephone number to connect to.
Set SIM1 User / PW
Set SIM2 APN
Set SIM2 User / PW
Set Satellite APN
Set Satellite User/PW
Set Ethernet IP
Static IP address. Set any of this, Gateway or DNS addresses to
0.0.0.0 for DHCP.
Set Ethernet Netmask
Default 255.255.255.0
Set Ethernet Gateway
Static Gateway IP address. Set any of this, IP or DNS addresses to
0.0.0.0 for DHCP.
Set Ethernet DNS
Static DNS IP address. Set any of this, IP or Gateway addresses to
0.0.0.0 for DHCP.
WiFi SSID
WiFi SSID / Password & LoRa Network ID / Key
WiFi Password
LoRa Mode
ABP(default) or OTA
Config Comms
...press Down
Logger
Status
Scheme
Status
Configure
Logger
