Spare parts
SSK-Series | Version 1.02
13
11 Spare parts
The spare parts can be obtained from the dealer or di-
rectly from the manufacturer. The contact details are in
chapter 1.2 Customer Service. Specify the following key
data when inquiring or ordering spare parts:
- device type
- item number
- Position number
- Construction year
- amount
- desired shipping method (post, freight, sea, air,
express)
- delivery address
Spare parts orders without details given above can not
be considered. If the shipping method is missing, ship-
ping will be at the discretion of the supplier.
Details of the device type, article number and year of
construction can be found on the type plate, which is
attached to the sand blasting cabin.
Example
The gloves for the Sandblasting cabin SSK 1 must be
ordered.
The gloves are in the spare parts drawing with Item
number 21 indicated.
- Type of device:
Sandstrahlkabine SSK 1
- Item number:
620 4000
- Position number:
21
The order number is:
0-6204000-21
The order number consists of the article number, the
item number and one digit in front of the item number.
- Place the digit 0 in front of the item No.
- Also place the digit 0 in front of the position 1
through 9.
The Item number of your device:
Sandblasting cabinet SSK 1:
620 4000
Sandblasting cabinet 1.5:
620 4010
DANGER!
Risk of injury through use
wrong spare parts!
The use of incorrect or faulty replacement parts can
be dangerous to the operator and cause damage
and malfunction.
- Only original spare parts from the manufacturer or
replacement parts approved by the manufacturer
must be used.
- In case of doubt, always contact the manufacturer
Tips and recommendations
Using non-approved spare parts voids the manu-
facturer's warranty.