unicraft SRWH 3001 SIL, Operating Instructions Manual

Page: 7 / 20

Transport, packaging, storage
SRWH-Series | Version 1.01 7
4.1 Environmental conditions
4.2 Type plate
Fig. 2: Type plate of the floor jack SRWH 3002 EF
5 Transport, packaging, storage
5.1 Transport
Check the floor jack on delivery for any visible trans-por-
tation damage. If you notice any damage to the device
please report this immediately to the carrier or dealer.
5.2 Packaging
All used packaging materials and packaging aids are
recyclable and should be taken to a materials recycling
depot to be disposed of.
The delivery packaging is made of cardboard, so
please dispose carefully by having it chopped up and
given to the recycling collection.
The film is made of polyethylene (PE) and the cushioned
parts of polystyrene (PS). Deliver these substances to a
collection point for recyclable materials or to the waste
disposal company which looks after your region.
5.3 Storage
The floor jack should be lubricated and then stored in a
dry, frost-free environment.
Only store the floor jack with the lift arm lowered and the
drain valve closed. Do not put anything on the floor jack.
Size [mm] 3001 SIL 3002 EF
A 120 95
B 340 425
C 158 150
D 460 520
E 628 690
F 1756 1840
G 343 370
H 285
Conditions
Working temperature -5°C to +40°C
Storage temperature -25°C to +55°C
Transport temperature -25 °C to +70 °C (< 24 h)
Operating height max. 1000 m
Air humidity (at 40 °C) max. 85% relative
humidity
Working environment not flammable, dry and
durst-free
Lighting > 300 LUX
NOTE!
The floor jack should be protected from humidity.