Unicorn Information System
http://www.eunicorn.co.kr
XX
6) After finishing drive integrity verification,
type “Y” at “Do you wish to use the
maximum available size for a Primary DOS
Partition (Y/N)”
7) Type the capacity or % which you want to
use and press [Enter].
8) Drive integrity verification will start again.
After finishing that, press [ESC] key when
the “Primary DOS Partition created,
drive letters changed or added” message
displays.
9) Press [ESC] key again. “ Shut down
Windows before restarting” message will
be displayed. Press [ESC] key finally for
exiting FDISK.
10) Type “ exit ” command at
“C:
ӫ
WINDOWS>” and press [Enter]
for returning to windows screen.
Making partition and Formatting the HDDs under Windows 98SE/ME
7
Hard disk formatting and partition
