Unicorn LS2-H540, Safety Instructions

Page: 5 / 39

Installation
★ Machine installation should only be
carri ed out by a qualified technician.
★ Contact your Unicorn dealer or a
qualified electrician for any electrical
work that may need to be done.
★ The sewing machine weighs more than
43kg.
The instal lation should be carried out by
two or more people.
★ Th e top of the table should be 40 mm
in th ickness and should be stron g
enough to hold the weight and
wi thstand the vibration of the sewin g
mach ine.
★ Do not connect the power cord until
installation is complete. otherwise the
mach ine may operate if the treadle is
depressed by mistake, which could
result in injury
★ Be sure to connect the ground. If the
ground connec tion is not secure, you
run the risk of receiving a serious
electric shoc k.
★ Refer to the instruc tion manual for the
motor for details on installing and
using the motor.
★ All cords shoul d be secure d at least 25
mm away from any moving parts.
Furthermore. do not excessively bend the
c able or secure it too firmly sta ples,
otherwise shocks could occur
★ install the belt covers to the machine
head and motor.
★ Be sure to wear protective goggl es and
gloves when handling the lubricating oil
and grease, so that they do not get
into your eyes or onto your skin,
otherwise inflammation can result.
Furthermore, do not dri nk the oil or eat
the grease under any circumstances,
as they can cause vomiting and
diarrhoea.
Keep the oil out of the reach of
childre n.
★ Avoid setting up sewing machine near
sources o strong electrical noise such
as high-frequency welding equipment.
If this precaution is not taken, incorrect
mach ine operation may result.
Sewing
★This sewi ng machine shoul d only be
used by operators who have received
the necessary training in safe use
bef ore hand.
★The sewing machine should not be used
for any applications other than sewing.
★ Do not touc h any of the moving parts
or press any objects against the
machine wh ile sewing. as this ma y
result in p ersonal injury or dama ge to
the machine.
- 4 -
★ Wait at least 5 minutes after turning off the power switch and disconnecting the power
cord from the wall outlet before opening the face plate of the control box. Touching
areas where high voltages art present can result in severe injury.
ꍾ Notes on safety